滤篮滤袋

PP/PE滤袋(产品特点)PP/PE fiter bag (produc fatures)
1.使用符合FDA要求的卫生级过滤材料，不含硅污染。
2.单层深层过滤结构。
3.1~200微米精度范围，公称精度。
4.广泛的过滤材料化学兼容性。
5.过滤材料表面经过专业防纤维游离光洁处理。
6.截渣量大，使用寿命长。
7.建议更换压差为0.10MPa,使用不应超过0.16MPa。
1.Use sanitarygradefilter materials that meet FDA requirements,fre ofsilicon contamination.
2.Single-layer deepfitration structure.

3.Precision range i to 200 microns,nominal precision,
4.Extensive chemical compatibility of filte materials.
5.The surface ofthe filter material hasbeen treated to prevent fiber shedding,
6.Large dirt-holding capacity and long service life.
7.Recommended replacement presure difference of0.10 MPa,the use should notexceed0.16MPa.

NO尼龙滤袋(产品特点)NONylonflter bag(Product fcatures)
1.所用吸油材料为普通吸油袋的数倍，可快速吸附数倍于自身材料重量的各类油脂。
2.使用符合FDA要求的卫生级过滤材料，不含硅污染。
3.高强度单丝网，可酌情重复使用。
4.35～800微米精度范围。
5.建议更换压差为0.10MPa,使用不应超过0.16MPa。
6.建议使用流量一号袋每小时十吨，二号袋每小时二十二吨。
1.The oil absorpion material used is several times ofthe ordinary oil absorption bag,which canquickly absorb various kinds ofgrease several times the weightofits own material.
2.The sanitary-grade filter material that meets FDA requiremens is used,which does not containsilicon pollution.
3.High-st monofilament mesh,which can be reused as appropriate.
4.The precision range is 35 to 800microns.
5.Itis to replace the pressure differenc at 0.10 MPa,and the use should not exceed 0.16 MPa.

6.It is recommended use aflow rate of ten tons per hour for bag number one and twenty-two tons perhour for bagnumber two.

AC活性炭滤袋(产品特点)ACactivated catonflier bg(produtfeatures)
1.对一系列有害生物化学物质具有优异的吸附性能，被广泛用于去除水中的氯，有害生化物质和异味，拦截石棉等细微有害杂质，滤除水银和铅等有害重金属。
2.活性碳颗粒散装，不使用任何粘接剂，保留了碳粒表面积；对有害物质的吸附速度比普通挤压成型碳棒或碳滤纸数倍以上。
3.每一只标准二号袋内装五公斤具有高开孔率的椰壳活性碳颗粒。
4.椰壳活性碳颗粒已经过予冲洗，使用前只需三十秒冲洗，以排除在运输过程中磨擦析出的微量碳粉。
5.不等密度深层过滤结构，优异的容纳杂质能力。
6.全部使用符合FDA要求的卫生级过滤材料，不含硅污染。

7.作业中无碳颗粒，纤维及析出物游离出。
8.建议使用流量一号袋每小时六吨，二号袋每小时十二吨。
9.建议更换压差为0.12 Mpa,使用不应超过0.25 Mpa。
1.It has exelet adsorption performance for a series ofharmfulchemical substances and is widely used toremove chlorine,harmful biochemical substancesodors from water,intercept asbestosand other fine harmfulimpurities,and filter out harmful heavy metals such as mereury and lead.2.The activated carbon particles are,without any binder,which retains the surface area ofthe carbon particles;the adsorption speed of harmfulsubstanes isseveral times faster than that of ordinary extruded carbon or carbon filter paper,
3.Each standard No.2 bag contain five kilograms ofactivated carbon particles with high porosity from coconut shells.4.Theactivated parielesfrom coconut shells have been pre-washecd,andonly need to be washed for thirty seconds before use to remove the trace amount ofcarbon powcder that is frictionally during transportation.
5.The deep filtration structure with unequal density hasexcellent capacity to accommodate impurities.
6.All the filtering materials used meet the FDA reguirements and free ofsilicon pollution.7.There is no carbon partiele,fiber and leaching during operation.
8.It is ecommended to use a flow rate of6per hour for No 1 bag and 12 tons per hour for No.2bag
9.Itis recommended to replace thepresuredfferenceof.12 Mpa,and the use should not exceed 0.25Mpa.

0A除油滤袋(产品特点)OA oil removlflterbg (product fatures)
1.高效吸油能力，可快速吸附高达数倍于自身材料重量的各类油脂。2.全部使用符合FDA要求的卫生级毛细纤维过滤材料。
3.多层复合深层过滤结构。4.双重效用，吸油与拦截杂质。
5.1~100微米精度范围，公称精度。
6.广泛的过滤材料化学兼容性。
7.过滤材料表面经过专业防纤维游离光洁处理。
8.截渣量大，使用寿命长。
9.最佳更换压差为0.10MPa,最大不应超过0.16Mpao
1.Eficientoilabsorption capacity,can quickly absortb up to several tmes the weightofitsown material
of various oils and fats.
2.All anitary capilary fiberfitration materialsthat meet FDA requirements are used.
3.Mult-layer composite deep filter structure.
4.Dualeffect,oilabsorption and impurity interception.5.1-100 micron accuracy range,nominal accuracy.
6.Extensive chemical compatibilityof filter materials.7.The surface of the filter material is treated with professional anti-fiber free polishing.
8.Large amount of slag.longservicelife.
9.The best replacement pressurediference is 0.10MPa,and the maximumshould not exceed 0.16Mpa.

SEM除水滤袋(产品特点)SEM dewatering filter bag(product features)
1.除水能力：可快速吸收并截留高于材料自重数倍的水份。
2.双重效用：除了除水功能，还具有拦截固体杂质的功能。
3.精度等级：1,5,10,25和50微米。
4.过滤效率：公称精度，一次滤过杂质拦截率为85%。
5.过滤材料表面处理：经过专业防纤维游离处理。6.材料等级全部使用符合FDA要求的卫生级过滤材料。
7.过滤流量大，压差低；截渣量大，使用寿命长。8.建议更换压差为0.12Mpa,最大不应超过0.18Mpao。

1.Water removal capacity:canquickly absorb and retain several timesthe weight of water abovethe material's own weight.
2.Dual function in addition to the water removal functio,italso has the function ofintercepting solid impurities.
3.Accuracy grade:1,5,1025,and 50 microns.
4.Filtration eficiency:noinal accuracy,one-time filtration ofimpurities interception rate of85.5.Filtration material surface treatment:hasbeen professionally treated to prevent fiber liberation.
6.Material grade alluse food-grade filtration materials that meet FDA requirements.Large fltration flow,low pressurediffrence.
7.Largeamount ofresidue interception,long service life.
8.Recommended replacement presurediferenc is0.12Mpashoud not exced0.18Mpa maximum.