产品中心
概述overview
钛滤芯是以高纯钛为原料配合特殊工艺,经高压、高温烧结而成;因而,钛滤芯以其特殊的材料组成和成型工艺,使其具有很多优良性能:
1、强度高,耐压能力强(不易脱落);
2、结构均匀、孔隙率高、过滤阻力小、渗透性好;
3、耐高(低)温性能强(蒸汽过滤);
4、耐腐蚀能力强(在水和药液中无锈蚀》;
5、使用寿命长(为一般膜滤芯的几倍);
6、硬度高,反冲洗容易(易实现在线冲洗);
7、对人体的亲和能力强;
8、成型、加工方便,可根据要求加工成各种形状的滤芯。
The titanium filter element is made of high-purity titanium as raw material,combined withspecial process,and sintered under high pressure and temperature;therefore,the titanium filterelement has many excellent properties due toits special material composition and formingprOCess:
1.High strength and strong pressure resistancenot easy to falloff);
2.Uniform sructure,high porosity lowfiltrationresistance,and good permeability;
3.Stronghigh(low)temperature resistance (steam filtration);
4.Strong corrosion resistance(no rust in water and medicine);
5.Longservicelife(veral times ofordinary membrane filter element);
6.High hardness and easybackflushing(easy to achieveonline flushing);
7.Strong affintythe human body;
8.Convenient forming and processing,and can be procesed into various shapes of flterelements according to requirements.
主要性能及参数Main performance and parameters
1、过滤精度:0.45~50μm; 1.itration accuracy:0.45 to 50 μm;
2、孔隙率:28~50%; 2.Porosity:28to 5%;
3、透气性:0.02~20m³cm/m.mmH20; 3.Permeability:0.02 to 20m3cm/m:mmH20;
4、抗压强度:0.5~1.5MPa; 4.Compresive strength:0.5t 1.5 MPa;
5、耐蚀性:90%-PH2~12; 5.Corrosion resistance:90%-PH2to 12;
6、最大工作压差:0.3MPa; 6.Maximum working pressure:0.3MPa;
7、耐温性:280℃(湿态)。 7.Temperature rsistance:280C (wet condition).
主要规格Main secfcaions
1、M20660mm长度10英寸; 1.M2060mmlength 10 inches;
2、M20∮60mm长度20英寸; 2.M20手60mm length20 inches;
3、M2060mm长度30英寸; 3.M20f60mm length 30 inches;
4、M20660mm长度40英寸。 4.M20f60mm lengh 40 inches.
性能表Table of standard performance
注:对应10英寸滤芯
Note:Corresponding to 10inch filter element